7 Tips To Boost Your Brostrend WiFi Extender’s Performance

When you are doing some important work and your internet goes slow, it makes you feel frustrated. About 50% of people in the world face slow-speed of internet problems. That is the reason people are feeling that WiFi extenders are more reliable for them. But due to some reasons if your Brostrend WiFi extender is not performing well then you can read the below tips:

Restart Your Device

If you want to boost your WiFi signal strength then you should restart your device. It is the best and easiest way to increase the WiFi signals. Simply follow these steps:

• First, you should turn off your Brostrend WiFi extender.
• Wait for 45 seconds.
• Then turn it back on.
• After that, check whether the extender is showing a solid green light which means, you have successfully restarted your extender.

Use A 5GHz Frequency Band

There are two bands. The first is the 5GHz band and the second one is the 2.4GHz band. Now, we will tell you the difference between both bands. If you have a dual-band or tri-band of your wireless extender then whenever it is possible you can shift your device from the 2.4GHz band to the 5GHz band.

The slower 2.4GHz frequency using by many smart home appliances. However, you can connect your devices like smartphones, LED TVs, laptops, and speakers to connect via the 5GHz band, which is higher than the 2.4GHz band. If you don’t know how to check which WiFi band you are using then you can go to this link re.Brostrend.com and check the band.

Update The Firmware

When the software of the WiFi extender is not up to date then it will cause a problem of slow WiFi and safety issues. As a result, be sure to regularly update the firmware on your WiFi extender. This can upgrade your bandwidth and refresh your gadget so it works like new. So upgrade your WiFi extender carefully.

Relocate Your Extender

The location is very important to get a high range of signals at your place. People face slow internet issues in their area because they put their WiFi extenders in the cupboard or put it behind the tv. So that’s why your extender is not able to get the signals. So ensure that you should keep your extender in the central location. If you live in a two-story house then put your extender on the first floor. So that ground-floor or second-floor devices get proper signals. Keep in mind the right place for your extender is the high position and center location of your area.

Use An Unique Password

Use a strong password for your WiFi. If you have a weak password on your WiFi then your neighbors can steal your password and the hackers can also access your wireless network and get your details like your contacts, bank details, pictures, etc.

Firstly you can log in to your extender to keep your WiFi network secure. Change your wireless network’s name or password right away. You have to manually reconnect to your device, as you know it is important to change your WiFi name and password once in a while.

Change The Channel Band Width

Have you ever thought of how to set the best settings for your extender? These settings can help you get faster internet. It is possible to change your network’s channel width. Tweaking the channel width helps you achieve the best extender configuration. To get rid of interference make your channel width as narrow as possible. In an alternate scenario, the wider the WiFi channel’s width, the more will be the interferences.

Reset Your Brostrend Extender

Press the extender’s reset button with a needle and let go when the PWR LED is solidly on. The signal, WPS, and power LEDs will all flash immediately once, after which the power LED will go back to being a solid blue color. This proves that the factory settings on your WiFi extender reset successfully.

Note: After this process, if you are still facing the same problem then you should set up your extender again. If you do not have enough knowledge, you can go to the Brostrend WiFi extender setup.

Installation Process Of Brostrend Extender Via WPS Method

This is the quickest way to configure the Brostrend WiFi extender with the help of the WPS button. Consider this step to do this procedure: 

• First, push the WPS button of your existing router, or inside within 2 minutes press the WPS button of the Brostrend extender.
• Now you can see solid blue LED light on both device’s router and extender.
• As result solid blue LED light means they both are successfully linked with each other.

Contact Your ISP

If you try all these tips and still you are facing the problem, then you should contact your Internet Service Provider. They will send a technician to solve your WiFi problem.

Final Thoughts

In this post, we give you information on boosting your Brostrend WiFi extender and also tell you the setup process of the Brostrend extender. After this, if you are still experiencing issues with your Brostrend WiFi extender then talk with our expert team.