First of all, you have to decide what you are cleaning before staining. Carpet stain removal depends on many factors and can be very difficult to remove. Let’s first discuss the difference between a spot and a stain. The stain remains what you see (such as food, drink, etc.). Carpet stains are what is left after you have removed the stains. This is a change of color for your carpet. I’m going to assume that you have tried every possible cleaning product and consulted your carpet cleaning professional before deciding to remove the stains. Removing carpet stains is far from scientific. It comes with a little trial, error, and luck.
To carpet stain removal ballarat, carpet cleaning professionals use many different methods. I will show you several ways to imitate these methods to get the best results when removing stains from the carpet. Take a small amount of household hydrogen peroxide and apply it to the stain. There are three things that accelerate the oxidation process. Heat, alkaline, and ultraviolet light. Use these ingredients to make your efforts more effective. Remember, you have one advantage over any professional carpet cleaner – time. You can set aside five minutes to remove carpet stains, leave and repeat the whole process. A professional carpet cleaner needs to show results right now to please the customer. Here’s a step-by-step guide on how to remove carpet stains.
- Apply a small amount of household bleach on carpet stains.
- Leave the area in direct sunlight for as long as possible. If you have a source of UV light, it will be even more helpful … but most households do not.
- Let the peroxide stand for 24 hours and watch it. Check if you have removed any stains from the carpet.
- If not:
- Apply a small amount of household bleach on carpet stains. (Don’t worry, he neutralizes himself)
- Apply a small amount of household ammonia to carpet stains and peroxide (alkaline).
- Cover carpet stains with aluminum foil for 24 hours.
- Peel off the aluminum foil so that you have removed the stain from the carpet.
- If not:
- Apply a small amount of household bleach on carpet stains.
- Take a dry white terry cloth and fold it twice. Place a terry cloth over the carpet stains.
Using a hot iron, place the iron on the carpet stain for 30 seconds and remove it. This is the most aggressive treatment for carpet stains. If a color shift is observed, wait for 2 to 2 minutes for the carpet to cool and repeat until all stains have been removed. If the color doesn’t change, stop immediately and contact your own carpet cleaner for help. More aggressive bleaching will be required, which should not be trained by an untrained person.
It is important to be very careful here and it is recommended that you only rely on an IICRC carpet cleaning technician who will perform any additional bleaching procedures in the hope of removing stains. Professional carpet stain removal bradford uses two types of carpet bleach: oxidizing agents and reducing agents. Please note that these bleaches are not household sodium hypochlorite (Clorox) bleaches. If all else fails, aggressive bleaching may be the answer.
Again, these innovative stain removal methods are for certified carpet cleaners only. They should help remove stains from your carpet in the rare event that the above home remedies do not work. Good luck and be careful. Mistakes in the carpet cleaning process can cost a lot more than an expensive carpet cleaning company.